Are you trying to find a easy efficient gold recovery procedure?
Allow me to tell you concerning mineral processing equipment that is being used successfully all around the world, by large scale mining operations through to artisanal miners.
It’s an alternative to using cyanide.
Among the most simple and efficient technologies does NOT require the use of harmful chemicals.
Sure, using a cyanide solution for gold leaching is widespread.
BUT, as Wired magazine from the UK points out…
The waste product from cyanidation is a disgusting and poisonous gloop that could seep into rivers or poison groundwater, killing wildlife and producing landscape sterile. Huge pits of ore can be subjected to cyanide leaching in colonies, with the runoff a major environmental hazard which demands a substantial cost to stay safe.
Rather than that, why not use gravity?
GRAVITY SEPARATION IS COST-EFFECTIVE
Gravity separation of fine gold has been the working principle in several low-cost mineral processing plants, all over the world.
That is in both small and large-scale mineral extraction operations.
For instance, a small gold shaking table employs a low-capacity vibrating table for gold extraction.
Of course, it’s not only for gold. Mineral extraction employing a focusing table functions for recovering other precious metals and minerals too, including all significant minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.
The Wave Table is ideal for cleaning up sluice box separating and concentrates gold from black sands, also. The Wave Table is perfect for cleaning up centers from Knelson, Falcon, Knudsen, STLBs as well as other centrifugal concentrators. (For big throughputs and high capacity mining/processing surgeries, particularly for gold, we can help you with the most cost effective Centrifugal Concentrators.)
Larger mines are using Wave Tables to perform closing gold clean-ups and the’finishing’ of gold concentrates. This procedure removes the need to utilize cyanide or mercury.
Gold tide tables are lots better for the environment, as well as for workplace security!
When you wish to effectively recover fine gold from gold bearing ore, you need a Centrifugal Concentrator. By way of example, a 1-3 TPH unit will take care of both alluvial and hard rock material.
In a huge mineral processing plant, you might use a Centrifugal Concentrator (known in some states as an STLB) to execute the key concentration. That is, to recover all the gold and heavy minerals out of the ore feed.
This recovered material is referred to as the’concentrates’, or’cons’ for short.
THE SECONDARY CONCENTRATION
However, to really get’clean gold’, you need to then run the cons through another procedure (a secondary concentrator), such as running the cons above a Wave Table. By doing this, an updated percentage is regained that is a lot smaller in mass, so it is a lot easier to deal with.
When targets are washed up on a Wave Table, you create clean gold ready to be smelted and turned into a gold bar for sale.
All this without having cyanide or mercury.
Another cyanide-free alternative is chemical leaching.
Gold may be pulled from run of mine ore as well as from concentrates by using the Chemical Leaching System, and it can be a cost effective non-cyanide gold leaching system which GoldWaveTables.com can assist you with.
CLS may be used for virtually any metal but is particularly used for the recovery of silver, gold and platinum group metals.
3 MODELS OF THE GOLD WAVE TABLE
This unbelievable gold split device comes in 3 versions covering all scales of operation. Regardless of the name, a gold wave table works to extract ANY thick mineral, where there’s a specific gravity (density) differential between the valuable heavy mineral constituent and its own gangue or host substance. Additionally, it cleans grit and gold from the stripped carbon employed in CIP/CIL software.
The Greatest DEVICE
To quote Ian, a 30-year veteran from the mining and minerals industry,”I have personally had success with all the Wave Table regaining very fine heavy minerals such as gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. As it’s so efficient at recovering very nice particle sizes, it’s proved excellent as a scavenger on tailings. The Wave Table will easily recover 5 micron gold from tailings. In mineral processing, it is frequently what you lose to tailings that is as critical as what you recuperate. I’ve found that the Wave Table is the greatest device to test tailings for lost heavy minerals, such as gold. A simple test in your tailings will only require a few minutes. You may observe any heavy mineral lost in the tailings within a brief time period. Such a test will obviate the need for prolonged firing assay turn around times.”
The most significant model is the M10 that does around 8TPH (tonnes per hour) and the M8 model does around 1TPH. The smallest model, the M5, is acceptable for smaller cleanups of 20 kgs per hour and can be used as a lab unit.
– Gold wave tables are a lot better for the environment
– Better for office security too
– Efficient and cost-effective.
When you’re looking for gold recovery plant available, check out GoldWaveTables.com
The Wave Table can be utilized in the smallest to the biggest gold mine. They may be used for full scale manufacturing purposes, or just as a cleanup or concentration device from the gold room.
The Wave Table is now increasingly used to recover gold from test samples of a couple of kgs in size and upwards. This kind of majority testing is quick and the quantitative results mean that you’re not solely relying on flame assays or AAS, especially in visible free gold deposits, even if the gold is fine (5 to 20 microns).
Visit https://GoldWaveTables.com to learn more today.
We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.
Also learn more about Gold Recovery Plant For Sale here.